Straightening-drawing machine designed by NKMZ

Metallurgical and Sinking equipment Division manufactured and success-fully tested two additional straightening-drawing machines at Novokramatorsky Mashinostroitelny Zavod. Such equipment is installed in the technological line of continuous billet casting machine (CCM) and is intended for drawing out of the mold and subsequent straightening of a square billet with a cross section from 100×100 to 150×150 […]

More

NKMZ Wagon pusher

A new product will be supplemented to the wide range of machines and equipment produced by the Novokramatorsky Mashinostroitelny Zavod in 2021. It’s a modern wagon pusher, currently under manufacture for the Avdiivka Coke-Chemical Plant. It will be integrated into the existing wagon unloading process in the coal loading shop No. 2 instead of its […]

More

Increased capacity crusher of NKMZ

Novokramatorsky Mashinostroitelny Zavod produced for Poltavsky MPP modernized cone crusher for coarse grinding with hydraulic regulation of opening, model ККД1500х180 ГРЩ-М. As a result of the crusher design improvement, its capacity is 5.5 thousand tons/hour. It is almost 55% higher than before the modernization. NKMZ has already produced cone crushers of this standard size, but […]

More

The first units of the new reloader have been assembled

NKMZ has started assembling of a bridge-type grab double-carriage ore reloader designed and manufactured by NKMZ workers for Azovstal iron and steel works (Mariupol). Compared to the loaders previously produced at NKMZ, this one is the largest. Its dimensions are as follows: the distance between the supports – 115 m, the total length of the […]

More

Compact unicum

At NKMZ, within the framework of the technical re-equipment program, a new up-to-date unique slotting machine POLYMAT 70/300 СNC manufactured by Leistritz (Germany) was put into operation. This machine, probably, can be called one of the most compact among all metal-cutting machine tools operated at NKMZ today. Its dimensions: 1420x1250x1640 mm. At the same time, […]

More

Pipes for nuclear scientists in Turkey

NKMZ PJSC is involved in the manufacture and supply of pipes and pipe fittings used in high-pressure pipelines for the Akkuyu NPP under construction on the southern coast of Turkey. The shipment of a batch of 46 pcs of six-meter pipes has been completed, of which 26 have a diameter of 711 mm and 20 […]

More

Reliable protection against coronavirus

Voluntary vaccination of the NKMZ personnel against coronavirus started on July 26 at the plant territory. Within a week, the first thousand employees of NKMZ will receive the first injection out of two ones. Two-phase American Moderna vaccine is used for vaccination against COVID-19. It was developed by the National Institute of Allergy and Infectious […]

More

Continuous improvement

Novokramatorsky mashinostroitelny zavod (NKMZ) has completed the production of a mine winding machine МПБ-5х2.5х2.5. Its distinctive feature is represented by the brake located inside the drum. This made it possible to fully use the outer cylindrical surface of the drum for winding the rope, thereby increasing the rope capacity for the preset drum dimensions. The […]

More

Another casing for blast furnace

Owing to its unique technological capabilities, Novokramatorsky mashinostroitelny zavod (NKMZ PJSC) is known as manufacturer of big as well as complicated and precise machinery, equipment and components. In June, the company completed the manufacture of a large-sized assembly unit – a blast furnace casing. It consists of four, installed one on top of the other, […]

More

Metallurgists prefer NKMZ rolls

In May, the rolls and power generating equipment production division of the Novokramatorsky Mashinostroitelny Zavod shipped to the customers about 180 mill rolls with a total weight of over 1,500 t, weight range from 1 to 40 t. These are backup and work rolls, idle and driven rolls, top and bottom rolls, intermediate and vertical […]

More

NKMZ has manufactured a new section rolling mill

The Novokramatorsky Mashinostroitelny Zavod designed and manufactured a complex of equipment for a small-section wire mill 350/250. This is a modern universal highly automated mill for the bars (Ø10-30 mm) and wire rods (Ø5.5-12 mm) production in coils from various steel grades and titanium alloys. The equipment of the new mill includes: • section of […]

More

The twentieth turret of NKMZ has been shipped to the customer

Novokramatorsky Mashinostroitelny Zavod (NKMZ) shipped to metallurgists of OJSC “Uzmetkombinat” (Bekabad, Republic of Uzbekistan) a modern ladle turret of a new design for a continuous casting machine (CCM). Even with a rather tight delivery time for this equipment determined by the customer, due to the optimal organization of production, the plant’s employees managed to ensure […]

More

High performance crusher

At the Novokramatorsky Mashinostroitelny Zavod, the issuance of documentation for the modernized cone crusher for coarse crushing with hydraulic adjustment of the slot model KKD1500x180 GRSH-M for Mining-and-Processing Works of Poltava has been completed. It is now under construction. As a result of the improved design of the crusher, its productivity will increase to 5.5 […]

More

Credits for the unique capabilities of the equipment

The next, third casing of the blast furnace is being manufactured today by NKMZ, using the unique technological capabilities of the equipment which is installed in the workshops of the enterprise. The casing is the main supporting body of the blast furnace. It is lined with appropriate refractory materials that make it possible to smelt […]

More

Enormous and efficient

NKMZ PJSC has started manufacturing of a unique overhead ore double grab car reloader for Azovstal Iron & Steel Works. In recent years, NKMZ has manufactured, shipped and installed several coal grab reloaders for coal warehouses, including for Azovstal, as well as one ore reloader for the ore stock yard of PJSC Zaporizhstal. “The uniqueness […]

More

The twentieth mobile ladle turret of NKMZ

At Novokramatorsky Mashinostroitelny Zavod a modern ladle turret of a new design was presented to the customers – metallurgists of JSC “Uzmetkombinat” (Bekabad, Republic of Uzbekistan). Having looked at the work of the ladle turret, the Uzbek specialists were completely satisfied with it. As a result, an intermediate acceptance certificate was signed. NKMZ has wide […]

More

NKMZ – for “General Electric”

Novokramatorsky Mashinostroitelny Zavod plans to ship three 15-ton rotor shafts to General Electric (USA) in the second quarter of 2021. “NKMZ has been working with the GE Oil&Gas division of General Electric since 2013. At that time, our company was certified as a supplier of full-cycle finished machined parts for GE Oil&Gas, a global manufacturer […]

More

New roadheader for miners in Ukraine

Novokramatorsky Mashinostroitelny Zavod is preparing for shipment to customers – mine named in honor of Space Heroes and Dneprovskaya (PJSC “DTEK Pavlogradugol”) two roadheaders of the new П110-03 model with the longitudinal-axial cutting crown. Miners of PJSC DTEK Pavlogradugol duly appreciated the sinking equipment of NKMZ. Since 2017 the Novokramatorsk employees have supplied to them […]

More

Product range of NKMZ mills is extending

Mills have long been the most popular product range items of the Novokramatorsky Mashinostroitelny zavod. They are in high demand among mining companies, since they always confirm the declared technological and operational performance. Mills under NKMZ trademark are featured with high quality and reliability and equipped with up-to-date control systems. These are state-of-the-art mills. Over […]

More

NKMZ has summed up the results of activities in 2020

Novokramatorsky Mashinostroitelny Zavod (Kramatorsk, Donetsk region) has summed up the results of economic activity in 2020. The main technical and economic indices reflect positive dynamics. Compared to 2019, the sales volume amounted to 100.9 %, the output of commercial products – 100.4 % (including for export – 118.2%), the shipment of commercial products – 100.2%. […]

More

Electric workshop of NKMZ JSC performed in a new role

For the first time, three new sectors for the 1200-1500 mm inductor of the hardening plant ТПЧ-1500 of the press-forging workshop heat treatment area No. 1 were manufactured in the electric workshop of the Novokramatorsky Mashinostroitelny Zavod. Previously, they only repaired old inductors for hardening plants. As Sergei Seregin, the foreman of the ТПЧ heat […]

More

Central plant laboratory of NKMZ PJSC has been accredited

After successful auditing in September last year, on January 26 the Central plant laboratory of Novokramatorsky Mashinostroitelny Zavod was accredited by the National Accreditation Agency of Ukraine (NAAU). NAAU, in the laboratory’s accreditation certificate, confirmed its competence in accordance with the requirements of the DSTU ISO / IEC 17025: 2017 standard in the field of […]

More

NKMZ is the only industrial enterprise in the Rating of Intellectual Activity of Enterprises and Organizations of Ukraine

Ukrainian Institute of Intellectual Property (Ukrpatent) has published results of inventive activity for 2019. Novokramatorsky Mashinostroitelny Zavod has ranked among scientific, research and educational organizations and enterprises of Ukraine that received over five years (2015-2019) the largest number of patents for inventions and utility models being the only representative of industry. It is also worth […]

More

Ore bucket unloader (OBU) made by NKMZ for Zaporizhstal

A new ore bucket unloader (OBU) manufactured by Novokramatorsky Mashinostroitelny Zavod PJSC, as part of the modernization program for production facilities, was commissioned at Zaporizhstal PJSC. According to the press service of Zaporizhstal PJSC: “The new crane equipment has replaced the outdated analogue at the site of the ore storage yard of the blast furnace […]

More

NKMZ manufactured an innovative ball rolling mill

Novokramatorsky Mashinostroitelny Zavod (Kramatorsk, Donetsk region) shipped to the customer a ball rolling mill ШПС 60-100, designed to produce steel grinding balls with a diameter of 60, 80, 90 and 100 mm. Balls will be produced by cross-helical rolling with subsequent in-line heat treatment, meeting the requirements for their quality. Until recently, NKMZ have not […]

More

NKMZ continues to raise the salary

Social protection of employees is one of the main vectors of development of the enterprise, and the growth of the average salary is an indicator of stable work of the team of NKMZ employees and their confidence in the future. Thus, according to the results of work for 9 months of 2019, we revealed 41% […]

More

NKMZ celebrated 85 years of work from the commissioning day

On September 20-21, Novokramatorsky Mashinostroitelny Zavod celebrated three holidays: the 85th anniversary from the enterprise commissioning; Machine Builders Day, the date of which associated with the commissioning of NKMZ in 1966; Day of the City. In 1932 due to the construction of the giant of heavy engineering Kramatorsk became a city. Working team of NKMZ […]

More

Congratulation on the Machine-builder’s day from Georgy Skudar

Dear citizens of Kramatorsk! Machine-builder’s day is significant to each of us, because in every family, in every house in the city there are people who have devoted themselves to this intellectual profession or people connected with the city’s enterprises, which have always been the basis of industrial engineering in Ukraine. This holiday is significant, […]

More

Metinvest Holding LLC and NKMZ PJSC have signed memorandum on strategic cooperation

On July 24, the two largest Ukrainian companies – Novokramatorsky mashinostroitelny zavod PJSC (Kramatorsk, Donetsk region) and Metinvest Holding LLC (Mariupol, Donetsk Region) signed a memorandum on strategic cooperation. The long-term agreement is aimed at the development of the industrial sector of Ukraine, the reconstruction and modernization of equipment for metallurgical, mining and coal-mining enterprises. […]

More

NKMZ took part at the international trade fair in Germany

NovokramatorskyMashinostroitelnyZavod (Kramatorsk, Donetsk Region) took part in the X International Trade Fair of Metallurgy and Steel Production METEC-2019 (10th International Metallurgical Trade Fair & Congress), which took place in Dusseldorf (Germany) on June 25-29. This specialized trade fair is the most important event in the life of the worldmetallurgical industry. More than 500 exhibitors presented […]

More

The international research-and-practical conference was held at NKMZ

Based on Novokramatorsky Mashinostroitelny Zavod (Kramatorsk, Donetsk region), on June 19-20 the second international research-and-practical conference “Modern equipment complexes for the extraction, processing and transportation of mineral resources. Prospects for the technological processes development”. The first conference of the cycle those which dedicated to the 85th anniversary of the enterprise was held at the end […]

More

NKMZ realizes shipment of unique equipment to Ferrexpo Poltava Mining

Novokramatorsky mashinostroitelny zavod (Kramatorsk, Donetsk region) initiates the shipment of the second domestically-produced, unique (in regards to design and implementation) ring-type cooler for iron-ore rolled briquette. This high-technology machinery is designed for the largest Ukrainian ore-dressing and processing enterprise Ferrexpo Poltava Mining that holds the leading position for these products at the former Soviet Union […]

More

NKMZ – Uzbekistan: cooperation extends

Novokramatorsky Mashinostroitelny Zavod (NKMZ) continues to pay attention to the deeper development of the market of the Republic of Uzbekistan. Once again, the company successfully presented its products and technological capabilities at «Mining equipment, geological exploration and enrichment of ores and minerals «UzMiningExpo-2019» exhibition, which was held as part of the X international industrial forum […]

More