General purpose parallel-shaft reducers: - single-stage reducers with C/C distance - 355... 1250 mm. - two-stage reducers with low-speed range C/C distance - 400...1250 mm. - three-stage reducers with low-speed range C/C distance - 400...1250 mm.
Large size single and two-stage parallel-shaft reducers with C/C distance up to 2700 mm.
Two-stage worm and single-stage cone-worm reducers with top, bottom and lateral implementation of the worm to the gear and C/C distance - 63...630 mm.
Two-stage worm and two-stage cone-worm reducers with low-speed range C/C distance - 160...400 mm.
Combination two-stage worm and cylindrical worm reducers.
Single, two and three-stage epicyclic-gear-train reducers with vertical and horizontal output shaft implementation. Output torque – up to 1000 kNm.
Reducers for mine winders: - double-drive reducers: ЦО-14, ЦО-16, ЦО-18, ЦО-22; 2ЦД-2200 with C/C distance - 1400 mm; 1600 mm; 1800 mm; 2200 mm. - two-stage reducer ЦД-20 with total C/C distance - 2000 mm, and gear ratio - 20.
Two-stage right-angle reducers: - with low-speed range C/C distance up to 1250 mm. Transmission capacity – up to 1000 kW. - with in-line backstop arrester.
Gear wheels and pinion shafts of cylindrical, bevel, worm and other types.
Gear-type clutches for shafts connection with diameter 30...1000 mm.
Reducers for actuating of bucket wheel, walking and crawler-mounted excavators, trunk conveyors, underground railway escalators.
Design engineering and manufacturing of reducers for imported equipment.